From: Jerome Brunet Subject: [PATCH 0/3] arm64: dts: meson: g12a: add i2c Date: Tue, 14 May 2019 12:12:34 +0200 Message-ID: <20190514101237.13969-1-jbrunet@baylibre.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Kevin Hilman Cc: Jerome Brunet , devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Add the i2c controllers and pinctrl definitions to the g12a DT then the busses present on the u200 and sei510. Notice the use of the pinconf DT property 'drive-strength-microamp'. Support for this property is not yet merged in meson pinctrl driver but the DT part as been acked by the DT maintainer [0] so it should be safe to use. [0]: https://lkml.kernel.org/r/20190513152451.GA25690@bogus Guillaume La Roque (1): arm64: dts: meson: g12a: add i2c nodes Jerome Brunet (2): arm64: dts: meson: u200: enable i2c busses arm64: dts: meson: sei510: enable i2c3 .../boot/dts/amlogic/meson-g12a-sei510.dts | 6 + .../boot/dts/amlogic/meson-g12a-u200.dts | 21 ++ arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 268 ++++++++++++++++++ 3 files changed, 295 insertions(+) -- 2.20.1