From: Alexey.Brodkin@synopsys.com (Alexey Brodkin) Date: Thu, 16 May 2019 13:04:53 +0300 Subject: [PATCH] ARC: [plat-axs10x] Specify PHY node in .dtsi List-ID: Message-ID: <20190516100453.41530-1-abrodkin@synopsys.com> To: linux-snps-arc@lists.infradead.org For completeness of the HW description add missing PHY entry in AXS10x base-board .dtsi. Cc: Trent Piepho Cc: Rob Herring Signed-off-by: Alexey Brodkin --- arch/arc/boot/dts/axs10x_mb.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index 4ead6dc9af2f..98e9d63e868e 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -79,6 +79,7 @@ interrupts = < 4 >; interrupt-names = "macirq"; phy-mode = "rgmii"; + phy-handle = <&phy0>; snps,pbl = < 32 >; clocks = <&apbclk>; clock-names = "stmmaceth"; @@ -86,6 +87,16 @@ resets = <&creg_rst 5>; reset-names = "stmmaceth"; mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy at 1 { + reg = <1>; + }; + }; + }; ehci at 40000 { -- 2.16.2