From: Neil Armstrong Subject: [PATCH 1/5] drm/bridge: dw-hdmi: allow ycbcr420 modes for >= 0x200a Date: Mon, 20 May 2019 15:37:49 +0200 Message-ID: <20190520133753.23871-2-narmstrong@baylibre.com> References: <20190520133753.23871-1-narmstrong@baylibre.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190520133753.23871-1-narmstrong@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: a.hajda@samsung.com, Laurent.pinchart@ideasonboard.com Cc: jonas@kwiboo.se, hverkuil@xs4all.nl, Neil Armstrong , dri-devel@lists.freedesktop.org, jernej.skrabec@siol.net, heiko@sntech.de, maxime.ripard@bootlin.com, hjc@rock-chips.com, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: dri-devel@lists.freedesktop.org Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support for these modes in the connector if the platform supports them. We limit these modes to DW-HDMI IP version >= 0x200a which are designed to support HDMI2.0 display modes. Signed-off-by: Neil Armstrong Tested-by: Heiko Stuebner --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++ include/drm/bridge/dw_hdmi.h | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index ab7968c8f6a2..b50c49caf7ae 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -2629,6 +2629,12 @@ __dw_hdmi_probe(struct platform_device *pdev, if (hdmi->phy.ops->setup_hpd) hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data); + if (hdmi->version >= 0x200a) + hdmi->connector.ycbcr_420_allowed = + hdmi->plat_data->ycbcr_420_allowed; + else + hdmi->connector.ycbcr_420_allowed = false; + memset(&pdevinfo, 0, sizeof(pdevinfo)); pdevinfo.parent = dev; pdevinfo.id = PLATFORM_DEVID_AUTO; diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index 66e70770cce5..0f0e82638fbe 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -130,6 +130,7 @@ struct dw_hdmi_plat_data { const struct drm_display_mode *mode); unsigned long input_bus_format; unsigned long input_bus_encoding; + bool ycbcr_420_allowed; /* Vendor PHY support */ const struct dw_hdmi_phy_ops *phy_ops; -- 2.21.0