From: Tony Lindgren Subject: [PATCH 11/13] bus: ti-sysc: Detect uarts also on omap34xx Date: Mon, 27 May 2019 23:24:12 -0700 Message-ID: <20190528062414.27192-12-tony@atomide.com> References: <20190528062414.27192-1-tony@atomide.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190528062414.27192-1-tony@atomide.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-omap@vger.kernel.org Cc: Dave Gerlach , Faiz Abbas , Greg Kroah-Hartman , Keerthy , Nishanth Menon , Peter Ujfalusi , Roger Quadros , Suman Anna , Tero Kristo , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Rob Herring , devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org Looks like we currently only detect UART on omap36xx, let's also add support for omap34xx. And let's also fix the SWSUP mode, it should be SWSUP_SIDLE for omap3, not SWSUP_SIDLE_ACT like for omap4 and later. Note that we are still booting omap3 for most part without ti-sysc, so no need to treat this change as a fix. Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1205,8 +1205,10 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { 0), SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff, 0), + SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff, + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), /* Uarts on omap4 and later */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff, SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), -- 2.21.0