From: Neil Armstrong Date: Tue, 28 May 2019 13:15:15 +0200 Subject: [U-Boot] [PATCH] boards: amlogic-g200: remove phy reset Message-ID: <20190528111515.1660-1-narmstrong@baylibre.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The PHY reset is now handled by the MAC driver, remove this leftover. Signed-off-by: Neil Armstrong --- board/amlogic/q200/q200.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c index 1932c14aa2..2ea97c362e 100644 --- a/board/amlogic/q200/q200.c +++ b/board/amlogic/q200/q200.c @@ -26,12 +26,6 @@ int misc_init_r(void) meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GX_GPIO_EN(3), BIT(14)); - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GX_GPIO_OUT(3), BIT(14)); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE); -- 2.21.0