From: Sasha Levin Subject: [PATCH AUTOSEL 4.4 37/56] ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA Date: Sat, 1 Jun 2019 09:25:41 -0400 Message-ID: <20190601132600.27427-37-sashal@kernel.org> References: <20190601132600.27427-1-sashal@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190601132600.27427-1-sashal@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Andrey Smirnov , Lucas Stach , Angus Ainslie , Chris Healy , Fabio Estevam , Shawn Guo , linux-arm-kernel@lists.infradead.org, Adam Ford , Sasha Levin , devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org From: Andrey Smirnov [ Upstream commit b14c872eebc501b9640b04f4a152df51d6eaf2fc ] Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality(this at least breaks RAVE SP serdev driver on RDU2). Fix the code to specify IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by: Andrey Smirnov Reviewed-by: Lucas Stach Cc: Angus Ainslie (Purism) Cc: Chris Healy Cc: Lucas Stach Cc: Fabio Estevam Cc: Shawn Guo Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Tested-by: Adam Ford Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e6af41c4bbc12..3992b8ea1c48f 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -853,7 +853,7 @@ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SDMA>, + clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; -- 2.20.1