Return-path: Received: from narfation.org ([79.140.41.39] helo=v3-1039.vlinux.de) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1hXoq5-0005GU-8N for ath10k@lists.infradead.org; Mon, 03 Jun 2019 15:25:34 +0000 From: Sven Eckelmann Subject: [PATCH v2] ath10k: avoid leaving .bss_info_changed prematurely Date: Mon, 3 Jun 2019 17:25:07 +0200 Message-Id: <20190603152507.22011-1-sven@narfation.org> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Kalle Valo , Sven Eckelmann , Sriram R From: Sven Eckelmann ath10k_bss_info_changed() handles various events from the upper layers. It parses the changed bitfield and then configures the driver/firmware accordingly. Each detected event is handled in a separate scope which is independent of each other - but in the same function. The commit f279294e9ee2 ("ath10k: add support for configuring management packet rate") changed this behavior by returning from this function prematurely when some precondition was not fulfilled. All new event handlers added after the BSS_CHANGED_BASIC_RATES event handler would then also be skipped. Signed-off-by: Sven Eckelmann --- Cc: Kalle Valo Cc: Sriram R Only compile tested v2: * rebased on top of commit 9e7251fa3897 ("ath10k: Check tx_stats before use it") drivers/net/wireless/ath/ath10k/mac.c | 64 ++++++++++++++++----------- 1 file changed, 38 insertions(+), 26 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 98a7842e09b1..90f59117a04d 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -5582,6 +5582,40 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw, mutex_unlock(&ar->conf_mutex); } +static void ath10k_recalculate_mgmt_rate(struct ath10k *ar, + struct ieee80211_vif *vif) +{ + struct ath10k_vif *arvif = (void *)vif->drv_priv; + const struct ieee80211_supported_band *sband; + struct cfg80211_chan_def def; + u8 basic_rate_idx; + int hw_rate_code; + u32 vdev_param; + u16 bitrate; + int ret; + + lockdep_assert_held(&ar->conf_mutex); + + if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) + return; + + sband = ar->hw->wiphy->bands[def.chan->band]; + basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1; + bitrate = sband->bitrates[basic_rate_idx].bitrate; + + hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate); + if (hw_rate_code < 0) { + ath10k_warn(ar, "bitrate not supported %d\n", bitrate); + return; + } + + vdev_param = ar->wmi.vdev_param->mgmt_rate; + ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, + hw_rate_code); + if (ret) + ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret); +} + static void ath10k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, @@ -5592,10 +5626,9 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, struct cfg80211_chan_def def; u32 vdev_param, pdev_param, slottime, preamble; u16 bitrate, hw_value; - u8 rate, basic_rate_idx, rateidx; - int ret = 0, hw_rate_code, mcast_rate; + u8 rate, rateidx; + int ret = 0, mcast_rate; enum nl80211_band band; - const struct ieee80211_supported_band *sband; mutex_lock(&ar->conf_mutex); @@ -5819,29 +5852,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, arvif->vdev_id, ret); } - if (changed & BSS_CHANGED_BASIC_RATES) { - if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) { - mutex_unlock(&ar->conf_mutex); - return; - } - - sband = ar->hw->wiphy->bands[def.chan->band]; - basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1; - bitrate = sband->bitrates[basic_rate_idx].bitrate; - - hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate); - if (hw_rate_code < 0) { - ath10k_warn(ar, "bitrate not supported %d\n", bitrate); - mutex_unlock(&ar->conf_mutex); - return; - } - - vdev_param = ar->wmi.vdev_param->mgmt_rate; - ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, - hw_rate_code); - if (ret) - ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret); - } + if (changed & BSS_CHANGED_BASIC_RATES) + ath10k_recalculate_mgmt_rate(ar, vif); mutex_unlock(&ar->conf_mutex); } -- 2.20.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k