From: Andreas Dannenberg Date: Tue, 4 Jun 2019 18:08:15 -0500 Subject: [U-Boot] [PATCH v3 05/18] arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages In-Reply-To: <20190604230828.12539-1-dannenberg@ti.com> References: <20190604230828.12539-1-dannenberg@ti.com> Message-ID: <20190604230828.12539-6-dannenberg@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de To enable the use of an EEPROM-based board detection scheme we need to be able to access the I2C bus associated with the EEPROMs across all 3 stages of U-Boot: R5 SPL, A53 SPL, and A53 U-Boot (proper). So go ahead and add/update the wkup_i2c0 peripheral module DTS definitions and its associated pinmux node accordingly. Signed-off-by: Andreas Dannenberg Reviewed-by: Lokesh Vutla --- arch/arm/dts/k3-am65.dtsi | 1 + arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 12 ++++++++++++ arch/arm/dts/k3-am654-base-board.dts | 15 +++++++++++++++ arch/arm/dts/k3-am654-r5-base-board.dts | 13 +++++++++++++ 4 files changed, 41 insertions(+) diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi index 5bcf6e0693..50f4be2047 100644 --- a/arch/arm/dts/k3-am65.dtsi +++ b/arch/arm/dts/k3-am65.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include / { model = "Texas Instruments K3 AM654 SoC"; diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index 67535f76a5..e21562252f 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -110,6 +110,14 @@ u-boot,dm-spl; }; +&wkup_pmx0 { + u-boot,dm-spl; + + wkup_i2c0_pins_default { + u-boot,dm-spl; + }; +}; + &main_pmx0 { u-boot,dm-spl; main_uart0_pins_default: main_uart0_pins_default { @@ -179,3 +187,7 @@ sdhci-caps-mask = <0x7 0x0>; ti,driver-strength-ohm = <50>; }; + +&wkup_i2c0 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts index ab233916c6..248d60e89b 100644 --- a/arch/arm/dts/k3-am654-base-board.dts +++ b/arch/arm/dts/k3-am654-base-board.dts @@ -55,6 +55,15 @@ }; }; +&wkup_pmx0 { + wkup_i2c0_pins_default: wkup-i2c0-pins-default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ + AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ + >; + }; +}; + &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; @@ -62,3 +71,9 @@ non-removable; ti,driver-strength-ohm = <50>; }; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; +}; diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index 8deda328d0..9d9b3d5852 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -136,6 +136,13 @@ >; u-boot,dm-spl; }; + + wkup_i2c0_pins_default: wkup-i2c0-pins-default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ + AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ + >; + }; }; &main_pmx0 { @@ -176,3 +183,9 @@ /delete-property/ power-domains; ti,driver-strength-ohm = <50>; }; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; +}; -- 2.17.1