From: Andre Przywara Date: Wed, 19 Jun 2019 02:11:04 +0100 Subject: [U-Boot] [PATCH 2/7] sunxi: H6: DRAM: follow recommended PHY init algorithm In-Reply-To: <20190619011109.2080-1-andre.przywara@arm.com> References: <20190619011109.2080-1-andre.przywara@arm.com> Message-ID: <20190619011109.2080-3-andre.przywara@arm.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The DRAM controller manual suggests to first program the PHY initialisation parameters to the PHY_PIR register, and then set bit 0 to trigger the initialisation. This is also used in boot0. Follow this recommendation by setting bit 0 in a separate step. Signed-off-by: Andre Przywara --- arch/arm/mach-sunxi/dram_sun50i_h6.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c index e2f141eb9b..7a8b724f08 100644 --- a/arch/arm/mach-sunxi/dram_sun50i_h6.c +++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c @@ -75,12 +75,14 @@ static void mctl_core_init(struct dram_para *para) mctl_channel_init(para); } +/* PHY initialisation */ static void mctl_phy_pir_init(u32 val) { struct sunxi_mctl_phy_reg * const mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; - writel(val | BIT(0), &mctl_phy->pir); + writel(val, &mctl_phy->pir); + writel(val | BIT(0), &mctl_phy->pir); /* Start initialisation. */ mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0)); } -- 2.14.5