From: Tom Rini Date: Thu, 11 Jul 2019 18:06:37 -0400 Subject: [U-Boot] [PATCH] arm: mach-omap2: am33xx: Init pinmux before clock In-Reply-To: <20190525204035.5112-1-marex@denx.de> References: <20190525204035.5112-1-marex@denx.de> Message-ID: <20190711220637.GW5621@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sat, May 25, 2019 at 10:40:35PM +0200, Marek Vasut wrote: > The board_early_init_f() inits clock before initing pinmux. However, > the clock configuration code might need to adjust PMIC settings of a > PMIC on I2C bus (e.g. board/ti/am335x/board.c does that). If the I2C > bus pin muxing is not configured before attempting to communicate > with the PMIC, the communication will silently fail and the prcm_init() > may configure fast enough CPU clock that the default voltage provided > by the PMIC would be insufficient and the platform would become > unstable. > > Signed-off-by: Marek Vasut > Cc: Jean-Jacques Hiblot > Cc: Tom Rini Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: