From: sbabic at denx.de Date: Sat, 20 Jul 2019 08:45:43 +0000 (UTC) Subject: [U-Boot] [PATCH v2] serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53) In-Reply-To: <20190709150005.22111-1-lukma@denx.de> Message-ID: <20190720084619.333D9C21CB1@lists.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > This patch fixes not enabled uart2 (and hence serial console) on i.MX53 > devices. After following commit 1d255904c306 ("ARM: dts: imx: imx53: > Synchronize iMX53 DT with Linux") from the uart2 compatible the > 'fsl,imx7d-uart' has been removed (which was correct). > However, the root cause of the problem was the commit 98d62e618bb9 ("arm: > imx: add i.MX53 Beckhoff CX9020 Embedded PC") which introduced this > compatible. > Moreover, without this patch all i.MX53 UARTs are not usable as neither > 'fsl,imx53-uart' nor 'fsl,imx21-uart' are in compatible IDs in > drivers/serial/serial_mxc.c file. > The fix is to add 'fsl,imx53-uart' and 'fsl,imx21-uart' as compatibles > for the aforementioned serial driver (those are also defined in the Linux > kernel). > Signed-off-by: Lukasz Majewski > Acked-by: Marek Vasut Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================