From: sbabic at denx.de Date: Sat, 20 Jul 2019 08:46:01 +0000 (UTC) Subject: [U-Boot] [PATCH] ARM: imx6: DHCOM i.MX6 PDK: enable pad pull ups of SS lines of spi used for boot In-Reply-To: <20190701074209.2763-1-lzenz@dh-electronics.com> Message-ID: <20190720084640.6686DC21E53@lists.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > It turned out that after a reset the boot process from the spi bootflash is > disturbed by other spi slave devices connected to DHCOM SPI1, which uses the > same spi interface with a different SS line. > Therefore the pad pull ups are enabled. > Signed-off-by: Ludwig Zenz Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================