From: sbabic at denx.de Date: Sat, 20 Jul 2019 08:57:19 +0000 (UTC) Subject: [U-Boot] [PATCH] ARCH: imx: Call sata_remove() not on imx6 duallite/solo boards In-Reply-To: <20190702131052.78136-1-lzenz@dh-electronics.com> Message-ID: <20190720092407.BF0D8C21E02@lists.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > For a single binary approach for imx6 quad/dual/duallite/solo it > is necessary to enable CONFIG_SATA for quad/dual. On the other hand > on imx6 duallite/sole SATA is not available. > Therefore sata_remove() is skipped according to a blacklist scheme. > Adding further imx derivates is probably not recessary as they are > usually not pin-compatible and therefore a different board with its > own configuration. > Signed-off-by: Ludwig Zenz Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================