From: Igor Opaniuk Date: Mon, 5 Aug 2019 18:12:34 +0300 Subject: [U-Boot] [PATCH v2 00/10] apalis-tk1: fixes/updates for v2019.10 Message-ID: <20190805151244.28732-1-igor.opaniuk@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Misc. fixes related to pinmux configuration (fan), default bootargs, reset reason output and power rail configuration. Changes in v3: * Added patch for apalis-v1.2 hardware support (there are some 80 symbol warnings in pmux_pingrp_config definition, but fixing this will break aligment of pinmux configuration "table" in board/toradex/apalis-tk1/pinmux-config-apalis-tk1.h) * Attached R-b tags [Oleksandr Suvorov] from v2 [2] Changes in v2: * Rebased on the latest u-boot-tegra/master * Attached R-b tags [Oleksandr Suvorov] from v1 [1] [1] https://patchwork.ozlabs.org/cover/1139705/ [2] https://patchwork.ozlabs.org/cover/1140332/ Dominik Sliwa (2): apalis-tk1/t30: colibri_t30: display reset reason apalis-tk1: remove non-esential power rails on boot Igor Opaniuk (5): apalis-tk1: set apalis gpio 8 aka fan_en apalis-tk1: provide proper USB vendor id apalis-tk1: enable user debug by default apalis-tk1: add pcie_aspm=off to defargs apalis-tk1: switch to zImage Marcel Ziswiler (3): apalis-tk1: do not explicitly release reset_moci# apalis-tk1: remove default vesa vga mode from vidargs apalis-tk1: support v1.2 hardware revision arch/arm/dts/tegra124-apalis.dts | 89 ++++++++++--------- arch/arm/mach-tegra/sys_info.c | 32 ++++--- arch/arm/mach-tegra/tegra124/cpu.c | 45 ++++++++++ board/toradex/apalis-tk1/apalis-tk1.c | 47 ++++++++++ board/toradex/apalis-tk1/as3722_init.c | 23 +++++ .../apalis-tk1/pinmux-config-apalis-tk1.h | 21 +++-- configs/apalis-tk1_defconfig | 4 +- include/configs/apalis-tk1.h | 29 +++--- 8 files changed, 214 insertions(+), 76 deletions(-) -- 2.17.1