From: sbabic at denx.de Date: Mon, 5 Aug 2019 18:49:18 +0000 (UTC) Subject: [U-Boot] [PATCH 3/4] imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabled Message-ID: <20190805185040.4F434C21EE7@lists.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > In case CONFIG_SECURE_BOOT is enabled we need to limit the SPL size to > avoid a possible HAB failure event: > --------- HAB Event 1 ----------------- > event data: > 0xdb 0x00 0x14 0x42 0x33 0x22 0x33 0x00 > 0x00 0x00 0x00 0x0f 0x00 0x90 0x70 0x00 > 0x00 0x01 0x10 0x00 > STS = HAB_FAILURE (0x33) > RSN = HAB_INV_ADDRESS (0x22) > CTX = HAB_CTX_TARGET (0x33) > ENG = HAB_ENG_ANY (0x00) > As explained in Commit 23612534fe0f ("spl: imx6: Provide a SPL_SIZE_LIMIT > default") the i.MX6 SPL size limit is 68KB. > The ROM code is copying the image size defined in boot data to its > respective load address, in case we exceed the OCRAM free region a > HAB invalid address failure event is generated. > The maximum CSF size is defined in CONFIG_CSF_SIZE, reduce SPL size > limit based on this configuration. > Signed-off-by: Breno Lima > Reviewed-by: Fabio Estevam Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================