From: Kevin Hilman Subject: [PATCH v3 0/2] rtc: add new Amlogic Virtual Wake RTC Date: Mon, 12 Aug 2019 16:28:48 -0700 Message-ID: <20190812232850.8016-1-khilman@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Alexandre Belloni , linux-rtc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Neil Armstrong List-Id: devicetree@vger.kernel.org From: Kevin Hilman Add a new driver for the virtual wake RTC on Amlogic SoCs. The RTC is virtual from the Linux side because it's a hardware timer managed by firmware on the secure co-processor (SCP.) The interface is 1 register where a wakeup time (in seconds) is written. The SCP then uses this value to program an always-on timer. Changes since v2: - switch to devm_platform_ioremap_resource() - switch to devm_rtc_allocate_device() and rtc_register_device() Changes since v1: - add MAINTAINERS entry - add nop ->alarm_irq_enable() (workaround for RTC core limitation pointed out by Alexandre Belloni) - remove unused ->read_alarm() - fix statics - move resume to dev_pm_ops - add suspend hook - don't calculate (or write) the alarm timer value until suspend time Changes since Neil's original version - move from do_gettimeofday() to ktime_get() Kevin Hilman (1): dt-bindings: rtc: new binding for Amlogic VRTC Neil Armstrong (1): rtc: Add Amlogic Virtual Wake RTC .../bindings/rtc/rtc-meson-vrtc.txt | 22 +++ MAINTAINERS | 1 + drivers/rtc/Kconfig | 11 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-meson-vrtc.c | 156 ++++++++++++++++++ 5 files changed, 191 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt create mode 100644 drivers/rtc/rtc-meson-vrtc.c -- 2.22.0