From: Vinod Koul Subject: [PATCH 2/3] dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support Date: Wed, 14 Aug 2019 18:05:11 +0530 Message-ID: <20190814123512.6017-2-vkoul@kernel.org> References: <20190814123512.6017-1-vkoul@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190814123512.6017-1-vkoul@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: Linus Walleij Cc: linux-arm-msm@vger.kernel.org, Bjorn Andersson , Vinod Koul , Andy Gross , Rob Herring , Mark Rutland , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Add support for the PM8150b GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++ drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 56553c06f129..457459d17e79 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -22,6 +22,7 @@ PMIC's from Qualcomm. "qcom,pmi8998-gpio" "qcom,pms405-gpio" "qcom,pm8150-gpio" + "qcom,pm8150b-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" if the device is on an spmi bus or an ssbi bus respectively @@ -97,6 +98,7 @@ to specify in a pin configuration subnode: gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10) gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, gpio7 and gpio8) + gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7) - function: Usage: required diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 5286ec060894..931c9349f145 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1157,6 +1157,8 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pms405-gpio", .data = (void *) 12 }, /* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */ { .compatible = "qcom,pm8150-gpio", .data = (void *) 10 }, + /* pm8150b has 12 GPIOs with holes on 3, r and 7 */ + { .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 }, { }, }; -- 2.20.1