From: Takashi Iwai Subject: [PATCH] ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate() Date: Wed, 21 Aug 2019 08:20:13 +0200 Message-ID: <20190821062013.32014-1-tiwai@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (mx2.suse.de [195.135.220.15]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 428EDF80157 for ; Wed, 21 Aug 2019 08:20:15 +0200 (CEST) Received: from relay2.suse.de (unknown [195.135.220.254]) by mx1.suse.de (Postfix) with ESMTP id BDD2BAF23 for ; Wed, 21 Aug 2019 06:20:14 +0000 (UTC) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org The quirk function snd_emuusb_set_samplerate() has a NULL check for the mixer element, but this is useless in the current code. It used to be a check against mixer->id_elems[unitid] but it was changed later to the value after mixer_eleme_list_to_info() which is always non-NULL due to the container_of() usage. This patch fixes the check before the conversion. While we're at it, correct a typo in the comment in the function, too. Fixes: 8c558076c740 ("ALSA: usb-audio: Clean up mixer element list traverse") Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer_quirks.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 199fa157a411..27dcb3743690 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -1155,17 +1155,17 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, { struct usb_mixer_interface *mixer; struct usb_mixer_elem_info *cval; - int unitid = 12; /* SamleRate ExtensionUnit ID */ + int unitid = 12; /* SampleRate ExtensionUnit ID */ list_for_each_entry(mixer, &chip->mixer_list, list) { - cval = mixer_elem_list_to_info(mixer->id_elems[unitid]); - if (cval) { + if (mixer->id_elems[unitid]) { + cval = mixer_elem_list_to_info(mixer->id_elems[unitid]); snd_usb_mixer_set_ctl_value(cval, UAC_SET_CUR, cval->control << 8, samplerate_id); snd_usb_mixer_notify_id(mixer, unitid); + break; } - break; } } -- 2.16.4