From: Guillaume La Roque Subject: [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Date: Thu, 22 Aug 2019 00:24:19 +0200 Message-ID: <20190821222421.30242-5-glaroque@baylibre.com> References: <20190821222421.30242-1-glaroque@baylibre.com> Return-path: In-Reply-To: <20190821222421.30242-1-glaroque@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: rui.zhang@intel.com, edubezval@gmail.com, daniel.lezcano@linaro.org Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org List-Id: devicetree@vger.kernel.org Add minimal thermal zone for two temperature sensor One is located close to the DDR and the other one is located close to the PLLs (between the CPU and GPU) Signed-off-by: Guillaume La Roque Acked-by: Martin Blumenstingl --- .../boot/dts/amlogic/meson-g12a-sei510.dts | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index c9fa23a56562..35d2ebbd6d4e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -10,6 +10,7 @@ #include #include #include +#include / { compatible = "seirobotics,sei510", "amlogic,g12a"; @@ -33,6 +34,67 @@ ethernet0 = ðmac; }; + thermal-zones { + cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_hot: cpu-hot { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_critical>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_critical: ddr-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_critical>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + mono_dac: audio-codec-0 { compatible = "maxim,max98357a"; #sound-dai-cells = <0>; @@ -321,6 +383,7 @@ operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; + #cooling-cells = <2>; }; &cpu1 { @@ -328,6 +391,7 @@ operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; + #cooling-cells = <2>; }; &cpu2 { @@ -335,6 +399,7 @@ operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; + #cooling-cells = <2>; }; &cpu3 { @@ -342,6 +407,7 @@ operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; + #cooling-cells = <2>; }; &cvbs_vdac_port { @@ -368,6 +434,10 @@ status = "okay"; }; +&mali { + #cooling-cells = <2>; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; -- 2.17.1