From: Adam Ford Date: Thu, 22 Aug 2019 15:32:42 -0500 Subject: [U-Boot] [PATCH] ARM: omap3_logic: Fix SPL boot failure when EHCI enabled Message-ID: <20190822203242.19524-1-aford173@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Some of the USB code is still being built into SPL even when the SPL menu options have it explicitly disabled for SPL. Unit there is a better solution, This patch undefines CONFIG_USB_EHCI_OMAP when building SPL which reduces the code and lets the board boot again. Fixes: 25e4ff45b17d ("ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV Boards") Signed-off-by: Adam Ford diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index b7c3ddf564..90292ae312 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -30,6 +30,9 @@ /* I2C */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_USB_EHCI_OMAP +#endif #ifdef CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 4 #endif -- 2.17.1