From: Parthiban Nallathambi Date: Fri, 23 Aug 2019 18:19:48 +0200 Subject: [U-Boot] [PATCH v2 2/2] imx: pcl063: add nand boot support In-Reply-To: <20190823161948.731467-1-pn@denx.de> References: <20190823161948.731467-1-pn@denx.de> Message-ID: <20190823161948.731467-2-pn@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Booting from NAND needs nandbcb and nand boot device selection Signed-off-by: Parthiban Nallathambi --- Notes: Changes in v2: - None board/phytec/pcl063/spl.c | 3 +++ configs/phycore_pcl063_defconfig | 1 + 2 files changed, 4 insertions(+) diff --git a/board/phytec/pcl063/spl.c b/board/phytec/pcl063/spl.c index 6d4c827918..358156bfbc 100644 --- a/board/phytec/pcl063/spl.c +++ b/board/phytec/pcl063/spl.c @@ -197,6 +197,9 @@ void board_boot_order(u32 *spl_boot_list) case IMX6_BMODE_EMMC: boot_dev = BOOT_DEVICE_MMC2; break; + case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX: + boot_dev = BOOT_DEVICE_NAND; + break; default: /* Default - BOOT_DEVICE_MMC1 */ printf("Wrong board boot order\n"); diff --git a/configs/phycore_pcl063_defconfig b/configs/phycore_pcl063_defconfig index cf43b43924..c55670a8ff 100644 --- a/configs/phycore_pcl063_defconfig +++ b/configs/phycore_pcl063_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_MTD=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_CACHE=y +CONFIG_CMD_NANDBCB=y CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" CONFIG_MTDPARTS_DEFAULT="gpmi-nand:4m(uboot),1m(env),-(root)" CONFIG_CMD_UBI=y -- 2.21.0