From: Chunyan Zhang Subject: [PATCH 0/3] keep console alive even if missing the 'enable' clock Date: Mon, 26 Aug 2019 15:29:26 +0800 Message-ID: <20190826072929.7696-1-zhang.lyra@gmail.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Greg Kroah-Hartman , Jiri Slaby , Orson Zhai , Baolin Wang Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org, Chunyan Zhang List-Id: linux-serial@vger.kernel.org From: Chunyan Zhang After the commit 4007098f4ce4 (serial: sprd: Add power management for the Spreadtrum serial controller), the 'enable' clock was forced to be configured in device tree, otherwise the uart devices couldn't be probed successfully. With this patch-set, the uart device which is used as console would be allowed to register even without any clock configured in device tree, this will make debug easier. Chunyan Zhang (3): serial: sprd: check the right port and membase serial: sprd: add console_initcall in sprd's uart driver serial: sprd: keep console alive even if missing the 'enable' clock drivers/tty/serial/sprd_serial.c | 42 ++++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 8 deletions(-) -- 2.20.1