From: Roman Kapl Date: Wed, 28 Aug 2019 11:14:14 +0200 Subject: [U-Boot] [PATCH] ata: ahci allow 64-bit DMA for SATA Message-ID: <20190828091414.20620-1-rka@sysgo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Allow 64-bit DMA on AHCI. If not supported by the host controller, at least print a message and fail. Signed-off-by: Roman Kapl --- drivers/ata/ahci.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 9a08575053..02007ad4bd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -503,9 +503,15 @@ static int ahci_fill_sg(struct ahci_uc_priv *uc_priv, u8 port, } for (i = 0; i < sg_count; i++) { - ahci_sg->addr = - cpu_to_le32((unsigned long) buf + i * MAX_DATA_BYTE_COUNT); - ahci_sg->addr_hi = 0; + /* We assume virt=phys */ + phys_addr_t pa = (unsigned long)buf + i * MAX_DATA_BYTE_COUNT; + + ahci_sg->addr = cpu_to_le32(pa & U32_MAX); + ahci_sg->addr_hi = cpu_to_le32((pa >> 32) & U32_MAX); + if (ahci_sg->addr_hi && !(uc_priv->cap & AHCI_CAP_S64A)) { + printf("Error: DMA address too high\n"); + return -1; + } ahci_sg->flags_size = cpu_to_le32(0x3fffff & (buf_len < MAX_DATA_BYTE_COUNT ? (buf_len - 1) -- 2.22.0