From: Andy Shevchenko Subject: Re: [PATCH v2 2/2] touchscreen: goodix: define GPIO mapping for GPD P2 Max Date: Mon, 2 Sep 2019 13:04:15 +0300 Message-ID: <20190902100415.GX2680@smile.fi.intel.com> References: <20190831030916.13172-1-peter@typeblog.net> <20190831030916.13172-2-peter@typeblog.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190831030916.13172-2-peter@typeblog.net> Sender: linux-kernel-owner@vger.kernel.org To: Peter Cai Cc: "Rafael J. Wysocki" , Len Brown , Mika Westerberg , Linus Walleij , Bartosz Golaszewski , Bastien Nocera , Dmitry Torokhov , linux-gpio@vger.kernel.org, linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org List-Id: linux-input@vger.kernel.org On Sat, Aug 31, 2019 at 11:09:15AM +0800, Peter Cai wrote: > The firmware of GPD P2 Max could not handle panel resets although code > is present in DSDT. The kernel needs to take on this job instead, but > the DSDT does not provide _DSD, rendering kernel helpless when trying to > find the respective GPIO pins. > > Fortunately, this time GPD has proper DMI vendor / product strings that > we could match against. We simply apply an acpi_gpio_mapping table when > GPD P2 Max is matched. > > Additionally, the DSDT definition of the irq pin specifies a wrong > polarity. The new quirk introduced in the previous patch > (ACPI_GPIO_QUIRK_OVERRIDE_POLARITY) is applied to correct this. FWIW, Reviewed-by: Andy Shevchenko though one comment below. > > Signed-off-by: Peter Cai > --- > > v2: removed '#ifdef CONFIG_ACPI' as per suggestion. The #ifdef guards > for CONFIG_DMI is kept for consistency with the other dmi_system_id > definition in the same file. > --- > drivers/input/touchscreen/goodix.c | 31 ++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c > index 5178ea8b5f30..df476f7dcd95 100644 > --- a/drivers/input/touchscreen/goodix.c > +++ b/drivers/input/touchscreen/goodix.c > @@ -144,6 +144,31 @@ static const struct dmi_system_id rotated_screen[] = { > {} > }; > > +static const struct acpi_gpio_params irq_gpios_default = { 0, 0, false }; > +static const struct acpi_gpio_params reset_gpios_default = { 1, 0, false }; > +static const struct acpi_gpio_mapping gpio_mapping_force_irq_active_high[] = { > + { "irq-gpios", &irq_gpios_default, 1, ACPI_GPIO_QUIRK_OVERRIDE_POLARITY }, > + { "reset-gpios", &reset_gpios_default, 1 }, > + {} > +}; > + > +/* > + * Devices that need acpi_gpio_mapping to function correctly > + */ > +static const struct dmi_system_id need_gpio_mapping[] = { > +#if defined(CONFIG_DMI) && defined(CONFIG_X86) > + { > + .ident = "GPD P2 Max", > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "GPD"), > + DMI_MATCH(DMI_PRODUCT_NAME, "P2 MAX") > + }, > + .driver_data = &gpio_mapping_force_irq_active_high > + }, > +#endif > + {} > +}; > + > /** > * goodix_i2c_read - read data from a register of the i2c slave device. > * > @@ -795,6 +820,12 @@ static int goodix_ts_probe(struct i2c_client *client, > { > struct goodix_ts_data *ts; > int error; > + struct dmi_system_id *dmi_match; I guess it should be const as kbuild bot complained on v1. And perhaps you want to keep reverse xmas tree order in definition block: const struct dmi_system_id *dmi_match; struct goodix_ts_data *ts; int error; > + > + dmi_match = dmi_first_match(need_gpio_mapping); > + if (dmi_match) > + devm_acpi_dev_add_driver_gpios(&client->dev, > + dmi_match->driver_data); > > dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > -- > 2.23.0 > -- With Best Regards, Andy Shevchenko