From: Lukasz Majewski Date: Thu, 5 Sep 2019 09:54:55 +0200 Subject: [U-Boot] [PATCH v3 1/7] dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi file In-Reply-To: <20190905075501.11225-1-lukma@denx.de> References: <20190905075501.11225-1-lukma@denx.de> Message-ID: <20190905075501.11225-2-lukma@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de After this change it is possible to use imx28--u-boot.dtsi with the imx28-u-boot.dtsi explicitly included without breaking setup from imx28-.dts file. The problem is that the imx28.dtsi included in a wrong place overrides the changes made in imx28-.dts. As a result some devices are "disabled" in the final DTB. Signed-off-by: Lukasz Majewski --- Changes in v3: None Changes in v2: None arch/arm/dts/imx28-u-boot.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/dts/imx28-u-boot.dtsi b/arch/arm/dts/imx28-u-boot.dtsi index d545b402a7..9db72a6be3 100644 --- a/arch/arm/dts/imx28-u-boot.dtsi +++ b/arch/arm/dts/imx28-u-boot.dtsi @@ -5,7 +5,6 @@ * * SPDX-License-Identifier: GPL-2.0+ or X11 */ -#include "imx28.dtsi" &gpio0 { gpio-ranges = <&pinctrl 0 0 29>; -- 2.11.0