From: Grygorii Strashko Date: Mon, 9 Sep 2019 18:00:18 +0300 Subject: [U-Boot] [PATCH 1/6] net: ti: cpsw: enable 10Mbps link speed support in rgmii mode In-Reply-To: <20190909150023.4329-1-grygorii.strashko@ti.com> References: <20190909150023.4329-1-grygorii.strashko@ti.com> Message-ID: <20190909150023.4329-2-grygorii.strashko@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de According to TRMs the 10Mbps link speed is supported in RGMII only when CPSW2G MAC SL is configured for External Control ("in band") mode CPSW_SL_MACCTRL.EXT_EN(18) = 1. Hence update cpsw_slave_update_link() to follow documentation. [1] https://patchwork.kernel.org/patch/10285239/ Signed-off-by: Grygorii Strashko --- drivers/net/ti/cpsw.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ti/cpsw.c b/drivers/net/ti/cpsw.c index 20ddb44dd8..f0d008f0f5 100644 --- a/drivers/net/ti/cpsw.c +++ b/drivers/net/ti/cpsw.c @@ -33,6 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; #define GIGABITEN BIT(7) #define FULLDUPLEXEN BIT(0) #define MIIEN BIT(15) +#define CTL_EXT_EN BIT(18) /* DMA Registers */ #define CPDMA_TXCONTROL 0x004 #define CPDMA_RXCONTROL 0x014 @@ -489,6 +490,8 @@ static int cpsw_slave_update_link(struct cpsw_slave *slave, mac_control |= FULLDUPLEXEN; if (phy->speed == 100) mac_control |= MIIEN; + if (phy->speed == 10 && phy_interface_is_rgmii(phy)) + mac_control |= CTL_EXT_EN; } if (mac_control == slave->mac_control) -- 2.17.1