From: Andrew Lunn Subject: Re: [PATCH] ARM: dts: imx6dl: SolidRun: add phy node with 100Mb/s max-speed Date: Tue, 10 Sep 2019 20:50:33 +0200 Message-ID: <20190910185033.GD9761@lunn.ch> References: <20190910155507.491230-1-tinywrkb@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190910155507.491230-1-tinywrkb@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: tinywrkb Cc: Mark Rutland , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , Fabio Estevam , Sascha Hauer , Russell King , open list , Rob Herring , NXP Linux Team , Pengutronix Kernel Team , Shawn Guo , "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" List-Id: devicetree@vger.kernel.org On Tue, Sep 10, 2019 at 06:55:07PM +0300, tinywrkb wrote: > Cubox-i Solo/DualLite carrier board has 100Mb/s magnetics while the > Atheros AR8035 PHY on the MicroSoM v1.3 CPU module is a 1GbE PHY device. > > Since commit 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in > genphy_read_status") ethernet is broken on Cubox-i Solo/DualLite devices. Hi Tinywrkb You emailed lots of people, but missed the PHY maintainers :-( Are you sure this is the patch which broken it? Did you do a git bisect. Thanks Andrew