From: Tom Rini Date: Sat, 14 Sep 2019 19:55:03 -0400 Subject: [U-Boot] [PATCH] ARM: dts: dra74x: Fix iodelay configuration for mmc3 In-Reply-To: <20190827081123.10586-1-faiz_abbas@ti.com> References: <20190827081123.10586-1-faiz_abbas@ti.com> Message-ID: <20190914235503.GW6927@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Aug 27, 2019 at 01:41:23PM +0530, Faiz Abbas wrote: > According to the latest am572x[1] and dra74x[2] data manuals, mmc3 > default, hs, sdr12 and sdr25 modes use iodelay values given in > MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is > selected and correct iodelay values are configured. > > [1] http://www.ti.com/lit/ds/symlink/am5728.pdf > [2] http://www.ti.com/lit/ds/symlink/dra746.pdf > > Signed-off-by: Faiz Abbas Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: