From: Heiko Stuebner Subject: [PATCH 3/4] mfd: rk808: set rk817 interrupt polarity to low Date: Tue, 17 Sep 2019 10:12:55 +0200 Message-ID: <20190917081256.24919-3-heiko@sntech.de> References: <20190917081256.24919-1-heiko@sntech.de> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190917081256.24919-1-heiko@sntech.de> Sender: linux-kernel-owner@vger.kernel.org To: lee.jones@linaro.org Cc: linux-kernel@vger.kernel.org, d.schultz@phytec.de, linux-rockchip@lists.infradead.org, christoph.muellner@theobroma-systems.com, tony.xie@rock-chips.com, Heiko Stuebner List-Id: linux-rockchip.vger.kernel.org All other rk8xx operate with the polarity on low and even the old submitted devicetree snippet for the px30-evb declared the irq as low. So bring the rk817 preset in line with this, as there is really no reason for it to be the only with with a high polarity. The rk809/rk817 hasn't been added to any devicetrees so far, so this won't break anything. Signed-off-by: Heiko Stuebner --- drivers/mfd/rk808.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c index 966841744ee6..c0e5e921766d 100644 --- a/drivers/mfd/rk808.c +++ b/drivers/mfd/rk808.c @@ -207,7 +207,7 @@ static const struct rk808_reg_data rk808_pre_init_reg[] = { static const struct rk808_reg_data rk817_pre_init_reg[] = { {RK817_RTC_CTRL_REG, RTC_STOP, RTC_STOP}, - {RK817_GPIO_INT_CFG, RK817_INT_POL_MSK, RK817_INT_POL_H}, + {RK817_GPIO_INT_CFG, RK817_INT_POL_MSK, RK817_INT_POL_L}, {RK817_SYS_CFG(1), RK817_HOTDIE_TEMP_MSK | RK817_TSD_TEMP_MSK, RK817_HOTDIE_105 | RK817_TSD_140}, }; -- 2.20.1