From: Heiko Stuebner Subject: [PATCH 10/13] arm64: dts: rockchip: add px30-evb i2c1 devices Date: Tue, 17 Sep 2019 10:26:56 +0200 Message-ID: <20190917082659.25549-10-heiko@sntech.de> References: <20190917082659.25549-1-heiko@sntech.de> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190917082659.25549-1-heiko@sntech.de> Sender: linux-kernel-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, linux-rockchip@lists.infradead.org, christoph.muellner@theobroma-systems.com, Heiko Stuebner List-Id: devicetree@vger.kernel.org Enable i2c1 and adds the devices connected to it. This includes a magnetometer, goodix-touchscreen and accelerometer. Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30-evb.dts | 37 +++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 80524afe94da..1185a314ba4a 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -349,6 +349,43 @@ }; }; +&i2c1 { + status = "okay"; + + sensor@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc3v0_pmu>; + mount-matrix = "1", /* x0 */ + "0", /* y0 */ + "0", /* z0 */ + "0", /* x1 */ + "1", /* y1 */ + "0", /* z1 */ + "0", /* x2 */ + "0", /* y2 */ + "1"; /* z2 */ + }; + + touchscreen@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = ; + irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd>; + }; + + sensor@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + interrupt-parent = <&gpio0>; + interrupts = ; + }; +}; + &i2s1_2ch { status = "okay"; }; -- 2.20.1