From: Heiko Stuebner Subject: [PATCH 04/13] arm64: dts: rockchip: add default px30 emmc pinctrl Date: Tue, 17 Sep 2019 10:26:50 +0200 Message-ID: <20190917082659.25549-4-heiko@sntech.de> References: <20190917082659.25549-1-heiko@sntech.de> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190917082659.25549-1-heiko@sntech.de> Sender: linux-kernel-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, linux-rockchip@lists.infradead.org, christoph.muellner@theobroma-systems.com, Heiko Stuebner List-Id: devicetree@vger.kernel.org emmc chips are normally hooked up in standard ways using the full 8bit bus connection, so there should be no need for all future boards to define this on their own. So add default pin setups for 8bit busses and special boards really only needing 4 or 1 bit connections can override. Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index a178d6e2c279..f2bbdfa0e4aa 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -794,6 +794,8 @@ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; power-domains = <&power PX30_PD_MMC_NAND>; status = "disabled"; }; -- 2.20.1