From: Kishon Vijay Abraham I Subject: [RFC PATCH 01/21] dt-bindings: PCI: Endpoint: Add DT bindings for PCI EPF Bus Date: Thu, 26 Sep 2019 16:59:13 +0530 Message-ID: <20190926112933.8922-2-kishon@ti.com> References: <20190926112933.8922-1-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20190926112933.8922-1-kishon@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Bjorn Helgaas , Jonathan Corbet , Rob Herring , Jon Mason , Dave Jiang , Allen Hubbe , Lorenzo Pieralisi Cc: Mark Rutland , kishon@ti.com, linux-pci@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-ntb@googlegroups.com List-Id: devicetree@vger.kernel.org Add device tree bindings for PCI endpoint function bus to which endpoint function devices should be attached. Signed-off-by: Kishon Vijay Abraham I --- .../bindings/pci/endpoint/pci-epf-bus.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt diff --git a/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt b/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt new file mode 100644 index 000000000000..16727ddf01f5 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt @@ -0,0 +1,27 @@ +PCI Endpoint Function Bus + +This describes the bindings for endpoint function bus to which endpoint +function devices should be attached. + +Required Properties: + - compatible: Should be "pci-epf-bus" + +One or more subnodes representing PCIe endpoint function device exposed +to the remote host. + +Example: +Following is an example of NTB device exposed to the remote host. + +epf_bus { + compatible = "pci-epf-bus"; + + ntb { + compatible = "pci-epf-ntb"; + epcs = <&pcie0_ep>, <&pcie1_ep>; + epc-names = "primary", "secondary"; + vendor-id = /bits/ 16 <0x104c>; + device-id = /bits/ 16 <0xb00d>; + num-mws = <4>; + mws-size = <0x100000>, <0x100000>, <0x100000>, <0x100000>; + }; +}; -- 2.17.1