From: Kishon Vijay Abraham I Subject: [RFC PATCH 03/21] dt-bindings: PCI: Endpoint: Add DT bindings for PCI EPF NTB Device Date: Thu, 26 Sep 2019 16:59:15 +0530 Message-ID: <20190926112933.8922-4-kishon@ti.com> References: <20190926112933.8922-1-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20190926112933.8922-1-kishon@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Bjorn Helgaas , Jonathan Corbet , Rob Herring , Jon Mason , Dave Jiang , Allen Hubbe , Lorenzo Pieralisi Cc: Mark Rutland , kishon@ti.com, linux-pci@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-ntb@googlegroups.com List-Id: devicetree@vger.kernel.org Add device tree bindings for PCI endpoint NTB function device. Signed-off-by: Kishon Vijay Abraham I --- .../bindings/pci/endpoint/pci-epf-ntb.txt | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/endpoint/pci-epf-ntb.txt diff --git a/Documentation/devicetree/bindings/pci/endpoint/pci-epf-ntb.txt b/Documentation/devicetree/bindings/pci/endpoint/pci-epf-ntb.txt new file mode 100644 index 000000000000..e7896932423e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/endpoint/pci-epf-ntb.txt @@ -0,0 +1,31 @@ +PCI Endpoint NTB Function Device + +This describes the bindings to be used when a NTB device has to be +exposed to the remote host over PCIe. + +Required Properties: + - compatible: Should be "pci-epf-ntb" + - epcs: As defined in generic pci-epf bindings defined in pci-epf.txt + - epc-names: As defined in generic pci-epf bindings defined in pci-epf.txt + - vendor-id: As defined in generic pci-epf bindings defined in pci-epf.txt + - device-id: As defined in generic pci-epf bindings defined in pci-epf.txt + - num-mws: Specify the number of memory windows. Should not be more than 4. + - mws-size: List of 'num-mws' entries containing size of each memory window. + +Optional Properties: + - spad-count: Specify the number of scratchpad registers to be supported + - db-count: Specify the number of doorbell interrupts to be supported. Must + not be greater than 32. + +Example: +Following is an example of NTB device exposed to the remote host. + +ntb { + compatible = "pci-epf-ntb"; + epcs = <&pcie0_ep>, <&pcie1_ep>; + epc-names = "primary", "secondary"; + vendor-id = /bits/ 16 <0x104c>; + device-id = /bits/ 16 <0xb00d>; + num-mws = <4>; + mws-size = <0x100000>, <0x100000>, <0x100000>, <0x100000>; +}; -- 2.17.1