From: Maxime Ripard Subject: [PATCH 2/2] dt-bindings: usb: Bring back phy-names Date: Wed, 2 Oct 2019 13:26:51 +0200 Message-ID: <20191002112651.100504-2-mripard@kernel.org> References: <20191002112651.100504-1-mripard@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20191002112651.100504-1-mripard@kernel.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Greg Kroah-Hartman , Mark Rutland , Rob Herring , Frank Rowand Cc: devicetree@vger.kernel.org, Emmanuel Vadot , linux-usb@vger.kernel.org, Maxime Ripard , Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org While the original bindings that were superseeded by the YAML schemas didn't mention that phy-names was needed, it turns out that phy-names is required if phys is set according to phy/phy-bindings.txt. Let's add back those properties. Fixes: 14ec072a19ad ("dt-bindings: usb: Convert USB HCD generic binding to YAML") Fixes: c93bcace1098 ("dt-bindings: usb: Convert the generic OHCI binding to YAML") Fixes: c3e2485d5f4f ("dt-bindings: usb: Convert the generic EHCI binding to YAML") Reported-by: Emmanuel Vadot Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 7 ++++++- Documentation/devicetree/bindings/usb/generic-ohci.yaml | 7 ++++++- Documentation/devicetree/bindings/usb/usb-hcd.yaml | 5 +++++ 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 059f6ef1ad4a..1ca64c85191a 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -63,7 +63,11 @@ properties: description: Set this flag to force EHCI reset after resume. - phys: true + phys: + description: PHY specifier for the USB PHY + + phy-names: + const: usb required: - compatible @@ -89,6 +93,7 @@ examples: interrupts = <39>; clocks = <&ahb_gates 1>; phys = <&usbphy 1>; + phy-names = "usb"; }; ... diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index da5a14becbe5..bcffec1f1341 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -67,7 +67,11 @@ properties: description: Overrides the detected port count - phys: true + phys: + description: PHY specifier for the USB PHY + + phy-names: + const: usb required: - compatible @@ -84,6 +88,7 @@ examples: interrupts = <64>; clocks = <&usb_clk 6>, <&ahb_gates 2>; phys = <&usbphy 1>; + phy-names = "usb"; }; ... diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 9c8c56d3a792..7263b7f2b510 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -18,8 +18,13 @@ properties: description: List of all the USB PHYs on this HCD + phy-names: + description: + Name specifier for the USB PHY + examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb"; }; -- 2.23.0