From: Soeren Moch Subject: [PATCH 2/3] arm64: dts: rockchip: fix RockPro64 sdhci settings Date: Thu, 3 Oct 2019 23:50:35 +0200 Message-ID: <20191003215036.15023-2-smoch@web.de> References: <20191003215036.15023-1-smoch@web.de> Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <20191003215036.15023-1-smoch@web.de> Sender: linux-kernel-owner@vger.kernel.org To: Heiko Stuebner Cc: Soeren Moch , linux-rockchip@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: linux-rockchip.vger.kernel.org The RockPro64 schematics [1], [2] show that the rk3399 EMMC_STRB pin is connected to the RESET pin instead of the DATA_STROBE pin of the eMMC modu= le. So the data strobe cannot be used for its intended purpose on this board, and so the HS400 eMMC mode is not functional. Limit the controller to HS20= 0. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf [2] http://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Ro= ckpro64") Signed-off-by: Soeren Moch =2D-- Cc: Heiko Stuebner Cc: linux-rockchip@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org =2D-- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm6= 4/boot/dts/rockchip/rk3399-rockpro64.dts index 845eb070b5b0..2e44dae4865a 100644 =2D-- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -636,8 +636,7 @@ &sdhci { bus-width =3D <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; + mmc-hs200-1_8v; non-removable; status =3D "okay"; }; =2D- 2.17.1