From: Soeren Moch Subject: [PATCH 3/3] arm64: dts: rockchip: fix RockPro64 sdmmc settings Date: Thu, 3 Oct 2019 23:50:36 +0200 Message-ID: <20191003215036.15023-3-smoch@web.de> References: <20191003215036.15023-1-smoch@web.de> Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <20191003215036.15023-1-smoch@web.de> Sender: linux-kernel-owner@vger.kernel.org To: Heiko Stuebner Cc: Soeren Moch , linux-rockchip@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: linux-rockchip.vger.kernel.org According to the RockPro64 schematic [1] the rk3399 sdmmc controller is connected to a microSD (TF card) slot, which cannot be switched to 1.8V. So also configure the vcc_sdio regulator, which drives the i/o voltage of the sdmmc controller, accordingly. While at it, also remove the cap-mmc-highspeed property of the sdmmc controller, since no mmc card can be connected here. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Ro= ckpro64") Signed-off-by: Soeren Moch =2D-- Cc: Heiko Stuebner Cc: linux-rockchip@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org =2D-- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm6= 4/boot/dts/rockchip/rk3399-rockpro64.dts index 2e44dae4865a..084f1d994a50 100644 =2D-- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -353,7 +353,7 @@ regulator-name =3D "vcc_sdio"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt =3D <1800000>; + regulator-min-microvolt =3D <3000000>; regulator-max-microvolt =3D <3000000>; regulator-state-mem { regulator-on-in-suspend; @@ -624,7 +624,6 @@ &sdmmc { bus-width =3D <4>; - cap-mmc-highspeed; cap-sd-highspeed; cd-gpios =3D <&gpio0 7 GPIO_ACTIVE_LOW>; disable-wp; =2D- 2.17.1