From: Guillaume La Roque Subject: [PATCH v7 4/7] arm64: dts: meson: g12: Add minimal thermal zone Date: Fri, 4 Oct 2019 11:01:11 +0200 Message-ID: <20191004090114.30694-5-glaroque@baylibre.com> References: <20191004090114.30694-1-glaroque@baylibre.com> Return-path: In-Reply-To: <20191004090114.30694-1-glaroque@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: amit.kucheria@linaro.org, rui.zhang@intel.com, edubezval@gmail.com, daniel.lezcano@linaro.org Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org List-Id: devicetree@vger.kernel.org Add minimal thermal zone for two temperature sensor One is located close to the DDR and the other one is located close to the PLLs (between the CPU and GPU) Acked-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Tested-by: Christian Hewitt Tested-by: Kevin Hilman Signed-off-by: Guillaume La Roque --- .../boot/dts/amlogic/meson-g12-common.dtsi | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 0660d9ef6a86..a98c16e163c2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include / { interrupt-parent = <&gic>; @@ -94,6 +95,61 @@ #size-cells = <2>; ranges; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ddr_critical: ddr-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -2412,6 +2468,7 @@ assigned-clock-rates = <0>, /* Do Nothing */ <800000000>, <0>; /* Do Nothing */ + #cooling-cells = <2>; }; }; -- 2.17.1