From: megous@megous.com Subject: [RESEND PATCH 0/2] Add bluetooth support for Orange Pi 3 Date: Mon, 7 Oct 2019 22:31:50 +0200 Message-ID: <20191007203152.3889947-1-megous@megous.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Maxime Ripard , Chen-Yu Tsai Cc: Rob Herring , Mark Rutland , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Ondrej Jirman List-Id: devicetree@vger.kernel.org From: Ondrej Jirman (Re-send for Maxime, with already applied patches dropped. Nothing new.) This series implements bluetooth support for Xunlong Orange Pi 3 board. The board uses AP6256 WiFi/BT 5.0 chip. Summary of changes: - add more delay to let initialize the chip - let the kernel detect firmware file path - add new compatible and update dt-bindings - update Orange Pi 3 / H6 DTS Please take a look. thank you and regards, Ondrej Jirman Ondrej Jirman (2): arm64: dts: allwinner: h6: Add pin configs for uart1 arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++ -- 2.23.0