From: Tom Rini Date: Sat, 12 Oct 2019 16:26:30 -0400 Subject: [U-Boot] [PATCH 2/5] cmd: ti: ddr3: Fix ecc address calculation In-Reply-To: <20190916081719.21976-3-lokeshvutla@ti.com> References: <20190916081719.21976-1-lokeshvutla@ti.com> <20190916081719.21976-3-lokeshvutla@ti.com> Message-ID: <20191012202630.GO16029@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Sep 16, 2019 at 01:47:16PM +0530, Lokesh Vutla wrote: > ecc_address_range registers contains the start address and end address > of the DDR address space. But the ddr cmd driver is assuming the register > contains the start address and size of the DDR address space. Because > of this some valid ecc addresses are errored out as invalid address. > Fix this calculation. > > Signed-off-by: Lokesh Vutla Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: