From: Patrick Delaunay Date: Mon, 14 Oct 2019 10:00:25 +0200 Subject: [U-Boot] [RESEND PATCH 5/5] usb: host: dwc2: add trace to have clean usb start In-Reply-To: <20191014080025.11245-1-patrick.delaunay@st.com> References: <20191014080025.11245-1-patrick.delaunay@st.com> Message-ID: <20191014080025.11245-6-patrick.delaunay@st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Solve issue for the display of "usb start" command on stm32mp1 because one carriage return is missing in DWC2 probe. STM32MP> usb start starting USB... Bus usb-otg at 49000000: Bus usbh-ehci at 5800d000: USB EHCI 1.00 after the patch: STM32MP> usb start starting USB... Bus usb-otg at 49000000: USB DWC2 Bus usbh-ehci at 5800d000: USB EHCI 1.00 Signed-off-by: Patrick Delaunay --- drivers/usb/host/dwc2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index 5b499abded..5e1c78d3ed 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -1217,6 +1217,8 @@ static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) mdelay(1000); + printf("USB DWC2\n"); + return 0; } -- 2.17.1