From: Keerthy Date: Mon, 14 Oct 2019 14:10:55 +0530 Subject: [U-Boot] [PATCH 03/10] clk: clk-ti-sci: Notify AVS driver upon setting clock rate In-Reply-To: <20191014084102.18863-1-j-keerthy@ti.com> References: <20191014084102.18863-1-j-keerthy@ti.com> Message-ID: <20191014084102.18863-4-j-keerthy@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Notify AVS driver upon setting clock rate so that voltage is changed accordingly. Signed-off-by: Keerthy --- drivers/clk/clk-ti-sci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/clk/clk-ti-sci.c b/drivers/clk/clk-ti-sci.c index c25415d410..478349f22f 100644 --- a/drivers/clk/clk-ti-sci.c +++ b/drivers/clk/clk-ti-sci.c @@ -13,6 +13,7 @@ #include #include #include +#include /** * struct ti_sci_clk_data - clock controller information structure @@ -101,6 +102,10 @@ static ulong ti_sci_clk_set_rate(struct clk *clk, ulong rate) debug("%s(clk=%p, rate=%lu)\n", __func__, clk, rate); +#ifdef CONFIG_K3_AVS0 + k3_avs_notify_freq(clk->id, clk->data, rate); +#endif + /* Ask for exact frequency by using same value for min/target/max */ ret = cops->set_freq(sci, clk->id, clk->data, rate, rate, rate); if (ret) -- 2.17.1