From: sbabic at denx.de Date: Mon, 14 Oct 2019 12:40:31 +0000 (UTC) Subject: [U-Boot] [PATCH 1/2] imx8: Jump from alias to OCRAM address at SPL init Message-ID: <20191014124255.D6D0EC21E1A@lists.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > When running SPL on iMX8, the A core starts at address 0 > which is a alias to OCRAM 0x100000. > The alias only map first 96KB of OCRAM, so this require the > SPL size can't beyond 96KB. But when using SPL DM, the size increase > significantly and may exceed 96KB. > So to fix the problem, we will change SPL linker address to OCRAM > address 0x100000. And then jump to the absolute address not the PC relative > address for entering OCRAM. > Signed-off-by: Ye Li > Reviewed-by: Oleksandr Suvorov Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================