From: Ran Wang Date: Wed, 16 Oct 2019 15:45:28 +0800 Subject: [U-Boot] [PATCH 11/19] powerpc: add usb nodes to T102x dts In-Reply-To: <20191016074536.36014-1-ran.wang_1@nxp.com> References: <20191016074536.36014-1-ran.wang_1@nxp.com> Message-ID: <20191016074536.36014-11-ran.wang_1@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Ran Wang --- Depends on: http://patchwork.ozlabs.org/patch/1176766/ http://patchwork.ozlabs.org/patch/1176767/ arch/powerpc/dts/t102x.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/powerpc/dts/t102x.dtsi b/arch/powerpc/dts/t102x.dtsi index c49fd21..cee6158 100644 --- a/arch/powerpc/dts/t102x.dtsi +++ b/arch/powerpc/dts/t102x.dtsi @@ -39,6 +39,18 @@ device_type = "soc"; compatible = "simple-bus"; + usb at 210000 { + compatible = "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + phy_type = "utmi"; + }; + + usb at 211000 { + compatible = "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + phy_type = "utmi"; + }; + mpic: pic at 40000 { interrupt-controller; #address-cells = <0>; -- 2.7.4