From: Ran Wang Date: Wed, 16 Oct 2019 15:45:20 +0800 Subject: [U-Boot] [PATCH 03/19] arch: powerpc: add usb nodes to P1020 dts In-Reply-To: <20191016074536.36014-1-ran.wang_1@nxp.com> References: <20191016074536.36014-1-ran.wang_1@nxp.com> Message-ID: <20191016074536.36014-3-ran.wang_1@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Ran Wang --- Depends on: http://patchwork.ozlabs.org/patch/1176766/ http://patchwork.ozlabs.org/patch/1176767/ arch/powerpc/dts/p1020-post.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/powerpc/dts/p1020-post.dtsi b/arch/powerpc/dts/p1020-post.dtsi index 1e5e678..f68e4b6 100644 --- a/arch/powerpc/dts/p1020-post.dtsi +++ b/arch/powerpc/dts/p1020-post.dtsi @@ -24,6 +24,18 @@ single-cpu-affinity; last-interrupt-source = <255>; }; + + usb at 22000 { + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + phy_type = "ulpi"; + }; + + usb at 23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + phy_type = "ulpi"; + }; }; /* PCIe controller base address 0x9000 */ -- 2.7.4