From: Ran Wang Date: Wed, 16 Oct 2019 15:45:22 +0800 Subject: [U-Boot] [PATCH 05/19] arch: powerpc: add usb node to p2020 dts In-Reply-To: <20191016074536.36014-1-ran.wang_1@nxp.com> References: <20191016074536.36014-1-ran.wang_1@nxp.com> Message-ID: <20191016074536.36014-5-ran.wang_1@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Ran Wang --- Depends on: http://patchwork.ozlabs.org/patch/1176766/ http://patchwork.ozlabs.org/patch/1176767/ arch/powerpc/dts/p2020-post.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/powerpc/dts/p2020-post.dtsi b/arch/powerpc/dts/p2020-post.dtsi index f696f35..a79571d 100644 --- a/arch/powerpc/dts/p2020-post.dtsi +++ b/arch/powerpc/dts/p2020-post.dtsi @@ -13,6 +13,12 @@ compatible = "fsl,p2020-immr", "simple-bus"; bus-frequency = <0x0>; + usb at 22000 { + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + phy_type = "ulpi"; + }; + mpic: pic at 40000 { interrupt-controller; #address-cells = <0>; -- 2.7.4