From: Ran Wang Date: Wed, 16 Oct 2019 15:45:24 +0800 Subject: [U-Boot] [PATCH 07/19] arch: powerpc: add usb node to p2041 dts In-Reply-To: <20191016074536.36014-1-ran.wang_1@nxp.com> References: <20191016074536.36014-1-ran.wang_1@nxp.com> Message-ID: <20191016074536.36014-7-ran.wang_1@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Ran Wang --- Depends on: http://patchwork.ozlabs.org/patch/1176766/ http://patchwork.ozlabs.org/patch/1176767/ arch/powerpc/dts/p2041.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/powerpc/dts/p2041.dtsi b/arch/powerpc/dts/p2041.dtsi index 55f7adc..3317094 100644 --- a/arch/powerpc/dts/p2041.dtsi +++ b/arch/powerpc/dts/p2041.dtsi @@ -50,6 +50,18 @@ device_type = "soc"; compatible = "simple-bus"; + usb0: usb at 210000 { + compatible = "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + phy_type = "utmi"; + }; + + usb1: usb at 211000 { + compatible = "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + phy_type = "utmi"; + }; + mpic: pic at 40000 { interrupt-controller; #address-cells = <0>; -- 2.7.4