From: Jagan Teki Subject: [PATCH v4 3/7] Makefile: rockchip: Support SPL-alone mkimage Date: Thu, 24 Oct 2019 01:26:48 +0530 Message-ID: <20191023195652.7158-4-jagan@amarulasolutions.com> References: <20191023195652.7158-1-jagan@amarulasolutions.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20191023195652.7158-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+glpar-linux-rockchip=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: Kever Yang , Simon Glass , Philipp Tomsich Cc: u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, Jagan Teki , linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: linux-rockchip.vger.kernel.org Add SPL-alone mkimage tooling support via Makefile for few platforms or boards used in rockchip family. With this users would get rid of explicitly creating mkimage tool for rockchip rksd or rkspi boot modes. Signed-off-by: Jagan Teki --- Makefile | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 40cbf68fef..b58107d6ef 100644 --- a/Makefile +++ b/Makefile @@ -886,7 +886,7 @@ ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) ALL-y += u-boot-with-dtb.bin endif -ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy) +ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy) ALL-y += idbloader.img endif @@ -1342,11 +1342,19 @@ else ROCKCHIP_IMG_TYPE := rksd endif +# TPL + SPL +ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy) MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE $(call if_changed,mkimage) idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE $(call if_changed,cat) +else +MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) +idbloader.img: spl/u-boot-spl.bin FORCE + $(call if_changed,mkimage) +endif + endif ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) -- 2.18.0.321.gffc6fa0e3