From: Keerthy Date: Thu, 24 Oct 2019 15:00:54 +0530 Subject: [U-Boot] [PATCH v3 09/18] arm: dts: k3-am654-r5-base-board: Add VTM node In-Reply-To: <20191024093103.13220-1-j-keerthy@ti.com> References: <20191024093103.13220-1-j-keerthy@ti.com> Message-ID: <20191024093103.13220-10-j-keerthy@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add VTM node for voltage and thermal management. For u-boot, this is needed for supporting AVS class 0, as the efuse values for the OPPs are stored under the VTM. Signed-off-by: Tero Kristo Signed-off-by: Keerthy --- Changes in v3: * Moved from generic wakeup.dtsi to r5 board file. Changes in v2: * No change arch/arm/dts/k3-am654-r5-base-board.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index 174d202306..6ab0f4af10 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -97,6 +97,13 @@ u-boot,dm-spl; }; + wkup_vtm0: wkup_vtm at 42050000 { + compatible = "ti,am654-vtm", "ti,am654-avs"; + reg = <0x42050000 0x25c>; + power-domains = <&k3_pds 80>; + #thermal-sensor-cells = <1>; + }; + clk_200mhz: dummy_clock { compatible = "fixed-clock"; #clock-cells = <0>; -- 2.17.1