From: Keerthy Date: Thu, 24 Oct 2019 15:00:58 +0530 Subject: [U-Boot] [PATCH v3 13/18] arm: dts: k3-j721e-r5-common-proc-board: Add VTM node In-Reply-To: <20191024093103.13220-1-j-keerthy@ti.com> References: <20191024093103.13220-1-j-keerthy@ti.com> Message-ID: <20191024093103.13220-14-j-keerthy@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add VTM node for voltage and thermal management. For u-boot, this is needed for supporting AVS class 0, as the efuse values for the OPPs are stored under the VTM. Signed-off-by: Keerthy --- Changes in v3: * No change Changes in v2: * No change arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts index 54d7998d27..e569809fcb 100644 --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts @@ -59,6 +59,13 @@ mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>; mbox-names = "tx", "rx"; }; + + wkup_vtm0: wkup_vtm at 42040000 { + compatible = "ti,am654-vtm", "ti,j721e-avs"; + reg = <0x0 0x42040000 0x0 0x330>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; &dmsc { -- 2.17.1