From: matthias.bgg at kernel.org Date: Fri, 8 Nov 2019 14:49:47 +0100 Subject: [U-Boot] [PATCH v4 2/3] arm: dts: bcm283x: Rename U-Boot file In-Reply-To: <20191108134948.17742-1-matthias.bgg@kernel.org> References: <20191108134948.17742-1-matthias.bgg@kernel.org> Message-ID: <20191108134948.17742-2-matthias.bgg@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Matthias Brugger Rename the file bcm283x-uboot.dtsi so that it get automatically include through the scripts/Makefile.lib using $(CONFIG_SYS_SOC))-u-boot.dtsi Without this uarts and pincontroller miss the property dm-pre-reloc and the first call to bcm283x_mu_serial_ofdata_to_platdata() fails as the pins are not set correctly. As a result the U-Boot banner isn't shown on boot. Before commmit 143256b353 ("fdt: update bcm283x device tree sources to Linux 5.1-rc6 state") we included bcm283x-uboot.dtsi directly in the device-tree file. Which got deleted by the metioned commit. This is a much robuster solution. Reported-by: Tom Rini Reported-by: Heinrich Schuchardt Tested-by: Tom Rini [RPi 3, 32b and 64b modes] Signed-off-by: Matthias Brugger --- Changes in v4: None Changes in v3: - add tested-by tag Changes in v2: None arch/arm/dts/{bcm283x-uboot.dtsi => bcm283x-u-boot.dtsi} | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename arch/arm/dts/{bcm283x-uboot.dtsi => bcm283x-u-boot.dtsi} (100%) diff --git a/arch/arm/dts/bcm283x-uboot.dtsi b/arch/arm/dts/bcm283x-u-boot.dtsi similarity index 100% rename from arch/arm/dts/bcm283x-uboot.dtsi rename to arch/arm/dts/bcm283x-u-boot.dtsi -- 2.23.0